AS 4051210 | The fully automated wire cabling machine Wire Terminal WT C10 can produce up to 36 different wires fully automatically without manual intervention. The wire end treatment in the cross-section range from 0.5 mm² to 6 mm² is fully automate
AS 4051210 | The fully automated wire cabling machine Wire Terminal WT C10 can produce up to 36 different wires fully automatically without manual intervention. The wire end treatment in the cross-section range from 0.5 mm² to 6 mm² is fully automate
AS 4051210 | The fully automated wire cabling machine Wire Terminal WT C10 can produce up to 36 different wires fully automatically without manual intervention. The wire end treatment in the cross-section range from 0.5 mm² to 6 mm² is fully automate
SKU:
AS 4051210
MSRP
Was
Price
Now
$0.00
You save
Condition:
New
Width:
1.00
(in)
Height:
1.00
(in)
Depth:
1.00
(in)
The fully automated wire cabling machine Wire Terminal WT C10 can produce up to 36 different wires fully automatically without manual intervention. The wire end treatment in the cross-section range from 0.5 mm² to 6 mm² is fully automated without any
View full description
The fully automated wire cabling machine Wire Terminal WT C10 can produce up to 36 different wires fully automatically without manual intervention. The wire end treatment in the cross-section range from 0.5 mm² to 6 mm² is fully automated without any changeover. This includes the processes of cutting to length, stripping, crimping as well as project-related labeling of the wires., Rittal Automation Systems, Machine base and housing Control unit Mounting for wire marking unit Label printer for labeling of the wire rail magazine 1 x vibrofeeder pot WT 16 for 0.5 mm² 3 x vibrofeeder pot WT 20 for 0.75/1.0 mm² 3 x vibrofeeder pot WT 29 for 1.5/2.5 mm² 3 x vibrofeeder pot WT 43 for 4.0/6.0 mm², 77.2 in, 88.8 in, 88.8 in, 24 V, 1, 84633000, 1 pc(s), 3064.422 lbs, 4028177981218, The fully automated wire cabling machine Wire Terminal WT C10 can produce up to 36 different wires fully automatically without manual intervention. The wire end treatment in the cross-section range from 0.5 mm² to 6 mm² is fully automated without any changeover. This includes the processes of cutting to length, stripping, crimping as well as project-related labeling of the wires.
Machine base and housing Control unit Mounting for wire marking unit Label printer for labeling of the wire rail magazine 1 x vibrofeeder pot WT 16 for 0.5 mm² 3 x vibrofeeder pot WT 20 for 0.75/1.0 mm² 3 x vibrofeeder pot WT 29 for 1.5/2.5 mm² 3 x v
-2_1670261595__49352.original.png)
